Introduction
Fiberglass Honeycomb sandwich panel is made of FRP Skin and PP honeycomb core sheet. The surface laminate could be FRP skin or CFRTP tape. The FRP skin could be flat, embossed or colorful. It has many advantages so it’s better than traditional panels made from steel, aluminum and other metal. It’s long term use, lighter, higher strength, easy maintaining, durable in harsh temperature and condition, etc.
Features:
FRP PP honeycomb panel carries many remarkable features:
light weight, high strength, impact resistant, low maintenance
Corrosion resistant, anti-aging, anti-scratch
sanitary finish, glossy≥ smooth surface, durable, cleanable
engineering flexible, easy installation, easy repaired,
moisture resistant, low heat conductivity
resistance to mold, mildew, and bacteria growth,
yellowing resistant, stain resistant, deformation free,
Application
Fiberglass Honeycomb sandwich panel is often used as various project body, side walls, roof panels, floor, doors, partition, workbench and others as follows;
Building Products: used as wall panels, industrial panels, roof panels, doors,
Recreational vehicles: exterior ≥ interior panels, roof panels,
Transportation industry: truck body, side wall, roof, truck fairing, guard, floor hoods, truck sides
Wind Turbine: used on blades, canopy housing and rotor hoods in wind turbine
Sports safety: used on elbow protector, kneepad, chest protector, helm, crash helmet, etc
Marine: used as structural material including hull, deck, bulkhead, tank, canopies and cases
Others: Radar, tooling mould, dock, building, bridge, shakiness, chemical barrier for akd, pipe and grates
Specification:
Structure: FRP skin + PP honeycomb core + FRP skin
The thickness: is up to 65mm, the width is up to 5.7m and the length is up to 11.8m.
The Finish choice: Versatile, Gel coat available, different color/paint available,
ITEM |
surface |
core |
Length |
Width |
Thickness |
M |
M |
mm |
|||
FRP PP Honeycomb Panel |
FRP Skin |
PP Honeycomb |
up to 11.8m |
2.3m,5.7m,etc |
15,18,21 |
FRP PP Honeycomb Panel |
CFRT Tape |
PP Honeycomb |
up to 11.8m |
up to 3m |
0.4,0.6,2.2mm |
FRP PP Honeycomb Panel |
||||
properties |
units |
|||
Thickness |
mm |
15 |
20 |
25 |
Area Weight |
kg/m2 |
3.2 |
3.7 |
4.1 |
Compression strength |
Mpa |
1.7 |
1.7 |
1.5 |
bending strength |
Mpa |
15 |
11 |
9 |
bending modulus |
MPa |
1200 |
1100 |
1000 |
peel strength |
N/cm |
>240 |
>240 |
>240 |
peel load |
N |
>1500 |
>1500 |
>1500 |
Package ≥ shipment
Wrap with film to stay away from scratching
Fumigation free pallet available
For large size panel, it’s normally upload into the container by hand. And then we strengthen the panels by ropes inside the container from different angles. This allows the panel stay stable during the sea transportation.
http://www.sinauvafrp.com/